| Customization: | Available |
|---|---|
| After-sales Service: | Whole Life After Sale Service |
| Warranty: | 2 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1 |
Power Requirement |
Voltage | 220v/3ph/60hz |
| Main Motor power | 7.5kw | ||
| Cutter power | 5.5kw+5.5kw+2.5kw (servo motor) | ||
| 2 | Forming speed | 25-45m/min | |
| 3 | Forming stations | 12 row | |
| 4 | Thickness of structure | 30mm | |
| 5 | Forming shaft diameter | 50mm | |
| 6 | Screen | Touch screen | |
| 7 | Type of cutting | Non-stop cutting | |
| 8 | Control system | xinjie brand Inveter | |
| 9 | Install dimension(depend on the final design) | 4.6m×0.85m×1.3m | |
| 10. | Total weight (Approx) | 2.5T | |
| Manual Decoiler |
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled automatically. Loading capacity:4T Inner diameter: 450-508mm |
| Guiding Device |
Adopt guiding bar and sliding block to control the width and position of the steel sheet. |
| Roll Forming System |
Material of rollers:Cr12,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped. |
| Punch and Cutting device |
A. Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted. B. The cutting action is drove by the power from hydraulic station which guarantees the procession of the cutting and low noisy, long life. Blades :3sets Logo will be pressed on the punching die. |
| Hydraulic System |
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the punching and cutter machine to begin the punching and cutting job. |
| Control System |
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use Screen: Xinjie brand |
| Run out table |
To receive the finished profiles . Length of the table 3 meters |
){kind=link}