Roll Forming Machine Raw Materials PPGI Gi Zinc Coated Steel Galvanized Corrugated Roofing Sheets

• After-sales Service: Whole Life After Sale Service
• Warranty: 2 Years
• Tile Type: Colored Steel
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: zh
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Usage: Roof, Wall
• Transmission Method: Machinery
• Feature: Corrugated Iron Roofing Sheet Roll Forming Machine
• Suitable Material: PPGI Gi
• Thickness: 0.3-0.8mm
• Width: 1250mm as Custom Profile
• Voltage: 380V
• Speed: 30m/Min
• Rollers: 45# Steel as Customer Require
• Motor: 5.5kw
• Control: PLC Delta
• Cutting: Hydraulic / Electric
• Key Selling Points: Easy to Operate
• Cutting Blade: Cr12 MOV
• Delivery Time: 40 Days
• Transport Package: Plastic File
• Specification: 7.8X1.5X1.7M
• Trademark: ZH
• Origin: Hebei, China
• HS Code: 8455221000
• Production Capacity: 20 Sets Per Month
• Package Size: 520.00cm * 150.00cm * 130.00cm
• Package Gross Weight: 2300.000kg

Product Description

Corrugated Sheet Roll Forming Machine Corrugated Forming Machine Corrugated Roof Roll Forming Machine

This is SS304 Corrugated iron roofing sheet making machine , suitable for ss304 material and other harder coils , the finished sheet usually worked for roof and wall panel . It has beautiful water wave design , now is widely used in all over the world .
 

Corrugated Sheet Roll Forming Machine Corrugated Forming Machine Corrugated Roof Roll Forming Machine

Corrugated Iron Roofing Sheet Roll Forming Machine Parameters
 

Coil required	Material	PPGI GI AL
	Width	914/925/1000/1200/1220/1250mm
	Thickness	0.3-0.7mm , as custom order
Power required	Power	380V 50Hz 3 Phase , as custom order
	Main Motor	5.5KW  Siemens Brand
	Cutting Motor	4KW  Siemens
Machine	Support Frame	400 H Steel 10mm
	Forming Station	14 rows as profile
	Structure	18-20mm
	Shaft	75mm
	Roller	45# Steel with heat treatment
	Chains	1.2 inch
	Bearings	Standard  as custom order
	Speed	15-30m/min
	Electric Components	Delta and Siemens
	Size	7.5*1.3*1.6M
	Weight	4T

Detailed Photos 
 

Details of each part
Manual decoiler	Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled Manually. Loading capacity:5T Inner diameter: 450-508mm
Guiding Device	Adopt guiding bar and sliding block to control the width and position of the steel sheet. Pre-cutter used to cut sheet before roll forming , saving material .
Roll forming system	Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped
Cutting device	A. Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted. B. Adopts pillar type for good rigidity. C. The cutting action is drove by the power from hydraulic station which guarantees the procession of the cutting and low noisy, long life.
Hydraulic system	It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
PLC control system	The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:Delta
Run out table	To receive the finished products

Spare parts List

No.	Item	Qty
1	Limited switch	4
2	Chains	2
3	Value	2
4	Relay	2
5	Chains Joint	4
6	Encoder wheels	4

Packing and Shipping 

1. Metal roofing sheet roll forming machine iron roofing sheet making machine need one 20/40 feet container to load .
2.We have professional technicians for loading to make sure machine has no damage.
3.Please provide us the nearest port name, we will ask shipping cost and arrange shipping for you.

Company Introduction




FAQ

1. Can you make the machine according to my design or photo type?
A: Yes. We have an experienced engineers to work out the most suitable design and production plan for the machine.
2: How can we be assured that you will deliver us quality machine with spare parts?
A:1. Customers to send the technical people to our factory for checking the quality.
2.We can send the technicians to the buyer`s factory for the installation and trainning .
3.What about your warranty?
A: Within the One-YEARS period, we could supply you the replacement parts for free .
If any damaged parts caused by quality problems after two years,we will also help but customer pay the cost .

More information please send inquiry to us , you will get reply within 12 hours !