Customization: | Available |
---|---|
After-sales Service: | Whole Life After Sale Service |
Warranty: | Whole Life After Sale Service |
Still deciding? Get samples of US$ 200/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
C Z Purlin Making Machine | ||||
1 | Flat cutting head | one | ||
2 | Feeding | Guide shaft+Guide wheel | ||
3 | Leveling | Up three down four+Two shaft to send The solid shaft modulation and polishing plating heat treatment | ||
4 | Main forming | 18 roll stations (One set shaft is used for the waist high forming arbitrary adjustable roller set of 87-95 degrees) With 13 set of CZ swap modules, Rotate 180 degrees to complete switch |
||
5 | Press rib | straight rib | ||
6 | Straightening | The ten roll CZ dedicated two axial alignment+Two roller axial alignment A total of two straightening unit |
||
7 | Lead to send | With the transmission,Upper and lower shaft gear drive | ||
8 | Punching | After forming double vertival and horizontal 14*14 punch+double vertival and horizontal 18*35mm punch | ||
9 | Cutting | After forming the infinite shear system,Shear without change blade,Random blades of 80-200,The other blade, 200-300 one piece | ||
Control System | ||||
1 | PLC Simens | 1 Set | ||
2 | Remodel type | Electrical remodel (Three sets remodel motor0.75*3kw) | ||
3 | Remodel distribution box | 1 Set Installed in the middle of frame | ||
4 | An external controller | 1 pic (Can be convenient midpoint dynamic control in the production process, the debugging process forward and backward) | ||
5 | The main parts of origin | PLC Touch screen,relay(Japan omron),Limit switch(Korea autonics),The length of the encoder(Japan omron) | ||
Hydraulic system | ||||
1 | Hydraulic motor | Outside the five-star piston rod | ||
2 | Hydraulic pump | Power:22Kw 500 litres of fuel tank volume | ||
3 | The main part origin | Beijing huade electromagnetic valve | ||
Decoiler | ||||
1 | Load weight | 5T | ||
2 | Hold tight way | Manuel Four connecting rod centre to hold tight | ||
3 | The brake | Main shaft double hold | ||
Receiving table | ||||
1 | Length | 3 meters 2 sets | ||
2 | Receiving type | Frame body is channel steel and welded, roller surface | ||
The performance parameters | ||||
1 | Roller | Material:GCr15 bearing steel The processing technology:Nc machining after heat treatment to HRC58-60, better polishing plating again |
||
2 | Main shaft | Material:40Cr The processing technology:Nc machining modulation handle HRC28-32, then fine polishing plating |
||
Product parameters | ||||
1 | Product specifications | 1. (1) C width width (80-300mm), Z (100-300 mm) between any transformation;(2) the waist high (30-70mm) between any transformation;(3) small side (10-20 mm);(4) thickness t (1.5 -3.0 mm) is adjustable | ||
2 | Forming speed | High speed 25m/min(According to the number of the punching hole) | ||
3 | Raw Materials | Q195, Q235 hot rolling steel strip, or hot galvanized strip steel (1.5-3.0mm) | ||
Along with the accessories and conditions | ||||
1 | Tool | 1 set | ||
2 | The instructions | 1 book | ||
3 | Device color | The main body is blue and frame is gray |