| auto c z Shaped Purlin Interchange Steel Profile Cold Roll Forming Machine |
| 1 |
Flat cutting head |
one |
| 2 |
Feeding |
Guide shaft+Guide wheel |
| 3 |
Leveling |
Up three down four+Two shaft to send The solid shaft modulation and polishing plating heat treatment |
| 4 |
Main forming |
18 roll stations (One set shaft is used for the waist high forming arbitrary adjustable roller set of 87-95 degrees)
With 13 set of CZ swap modules, Rotate 180 degrees to complete switch |
| 5 |
Press rib |
straight rib |
| 6 |
Straightening |
The ten roll CZ dedicated two axial alignment+Two roller axial alignment
A total of two straightening unit |
| 7 |
Lead to send |
With the transmission,Upper and lower shaft gear drive |
| 8 |
Punching |
After forming double vertival and horizontal 14*14 punch+double vertival and horizontal 18*35mm punch |
| 9 |
Cutting |
After forming the infinite shear system,Shear without change blade,Random blades of 80-200,The other blade, 200-300 one piece |
| Control System |
| 1 |
PLC Simens |
1 Set |
| 2 |
Remodel type |
Electrical remodel (Three sets remodel motor0.75*3kw) |
| 3 |
Remodel distribution box |
1 Set Installed in the middle of frame |
| 4 |
An external controller |
1 pic (Can be convenient midpoint dynamic control in the production process, the debugging process forward and backward) |
| 5 |
The main parts of origin |
PLC Touch screen,relay(Japan omron),Limit switch(Korea autonics),The length of the encoder(Japan omron) |
| Hydraulic system |
| 1 |
Hydraulic motor |
Outside the five-star piston rod |
| 2 |
Hydraulic pump |
Power:22Kw 500 litres of fuel tank volume |
| 3 |
The main part origin |
Beijing huade electromagnetic valve |
| Decoiler |
| 1 |
Load weight |
5T |
| 2 |
Hold tight way |
Manuel Four connecting rod centre to hold tight |
| 3 |
The brake |
Main shaft double hold |
| Receiving table |
| 1 |
Length |
3 meters 2 sets |
| 2 |
Receiving type |
Frame body is channel steel and welded, roller surface |
| The performance parameters |
| 1 |
Roller |
Material:GCr15 bearing steel
The processing technology:Nc machining after heat treatment to HRC58-60, better polishing plating again |
| 2 |
Main shaft |
Material:40Cr
The processing technology:Nc machining modulation handle HRC28-32, then fine polishing plating |
| Product parameters |
| 1 |
Product specifications |
1. (1) C width width (80-300mm), Z (100-300 mm) between any transformation;(2) the waist high (30-70mm) between any transformation;(3) small side (10-20 mm);(4) thickness t (1.5 -3.0 mm) is adjustable |
| 2 |
Forming speed |
High speed 25m/min(According to the number of the punching hole) |
| 3 |
Raw Materials |
Q195, Q235 hot rolling steel strip, or hot galvanized strip steel (1.5-3.0mm) |
| Along with the accessories and conditions |
| 1 |
Tool |
1 set |
| 2 |
The instructions |
1 book |
| 3 |
Device color |
The main body is blue and frame is gray |
){kind=link}
){kind=link}