| Customization: | Available |
|---|---|
| After-sales Service: | Whole Life Aftersale Service |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
As a professional manufacturer,we can make C Channel u Channel Steel Purlin Channel Cold Roll Forming Making Machine by customer`s demand, with a profile drawing and thickness, we can design the machine quickly.Until now,we can do many kinds of roof panel machine,such as trapezoidal sheet making machine, corrugated sheet making machine, glazed tile making machine, Double Layer Roll Forming Machine and so on.
| C Z Purlin Making Machine | ||||
| 1 | Flat cutting head | one | ||
| 2 | Feeding | Guide shaft+Guide wheel | ||
| 3 | Leveling | Up three down four+Two shaft to send The solid shaft modulation and polishing plating heat treatment | ||
| 4 | Main forming | 18 roll stations (One set shaft is used for the waist high forming arbitrary adjustable roller set of 87-95 degrees) With 13 set of CZ swap modules, Rotate 180 degrees to complete switch |
||
| 5 | Press rib | straight rib | ||
| 6 | Straightening | The ten roll CZ dedicated two axial alignment+Two roller axial alignment A total of two straightening unit |
||
| 7 | Lead to send | With the transmission,Upper and lower shaft gear drive | ||
| 8 | Punching | After forming double vertival and horizontal 14*14 punch+double vertival and horizontal 18*35mm punch | ||
| 9 | Cutting | After forming the infinite shear system,Shear without change blade,Random blades of 80-200,The other blade, 200-300 one piece | ||
| Control System | ||||
| 1 | PLC Simens | 1 Set | ||
| 2 | Remodel type | Electrical remodel (Three sets remodel motor0.75*3kw) | ||
| 3 | Remodel distribution box | 1 Set Installed in the middle of frame | ||
| 4 | An external controller | 1 pic (Can be convenient midpoint dynamic control in the production process, the debugging process forward and backward) | ||
| 5 | The main parts of origin | PLC Touch screen,relay(Japan omron),Limit switch(Korea autonics),The length of the encoder(Japan omron) | ||
| Hydraulic system | ||||
| 1 | Hydraulic motor | Outside the five-star piston rod | ||
| 2 | Hydraulic pump | Power:22Kw 500 litres of fuel tank volume | ||
| 3 | The main part origin | Beijing huade electromagnetic valve | ||
| Decoiler | ||||
| 1 | Load weight | 5T | ||
| 2 | Hold tight way | Manuel Four connecting rod centre to hold tight | ||
| 3 | The brake | Main shaft double hold | ||
| Receiving table | ||||
| 1 | Length | 3 meters 2 sets | ||
| 2 | Receiving type | Frame body is channel steel and welded, roller surface | ||
| The performance parameters | ||||
| 1 | Roller | Material:GCr15 bearing steel The processing technology:Nc machining after heat treatment to HRC58-60, better polishing plating again |
||
| 2 | Main shaft | Material:40Cr The processing technology:Nc machining modulation handle HRC28-32, then fine polishing plating |
||
| Product parameters | ||||
| 1 | Product specifications | 1. (1) C width width (80-300mm), Z (100-300 mm) between any transformation;(2) the waist high (30-70mm) between any transformation;(3) small side (10-20 mm);(4) thickness t (1.5 -3.0 mm) is adjustable | ||
| 2 | Forming speed | High speed 25m/min(According to the number of the punching hole) | ||
| 3 | Raw Materials | Q195, Q235 hot rolling steel strip, or hot galvanized strip steel (1.5-3.0mm) | ||
| Along with the accessories and conditions | ||||
| 1 | Tool | 1 set | ||
| 2 | The instructions | 1 book | ||
| 3 | Device color | The main body is blue and frame is gray | ||
){kind=link}